GR-89 GPS Receiver Module

Description:

1)GR-89 GPS Receiver Module
2)High performance, low power consumption GR-89
3)Easy integrated GPS engine/module

1)GR-89 GPS module , GPS module GR-89

2)High performance, low power consumption GR-89
3)Small size GR-89
4)Easy integrated GPS engine/module

 

The GR-87 design utilizes the latest surface mount technology(BGA) and high level circuit integration to achieve superiorperformance while minimizing space and power requirements. Thishardware capability combined with software intelligence makes theboard easy to be integrated and used in all kinds of navigationapplications or products. The application system may communicatewith the engine board set via two RS232 compatible bi-directionalcommunication channels with CMOS/CMOS 3V voltage level.

Feature:
Build on high performance SiRF StarIII chipset.
Average Cold Start time and under 45 seconds.
Low power consumption
20 channels "All-in-View" tracking.
200, 000 effective correlators for fast TTFF and high sensitivityacquisitions.
Integrated ARM7TDMI CPU with software engineering services andavailable for embedded customer defined applications.
On chip 1Mb SRAM.
Dual TTL level serial ports with one for GPS receiver commandmessage interface, another one for RTCM-104 DGPS input.
Compact Board Size 1"x1"x0. 27"(25. 4x25. 4x7mm) for easyintegration into hand-held device.
Reacquisition Time 0. 1 seconds
Support Standard NMEA-0183 and SiRF Binary protocol
Support Accurate 1PPS Output Signal Aligned with GPS Timing
Multi-path Mitigation Hardware
On-board RTCM SC-104 DGPS and WAAS /EGNOS Demodulator
Built-in a lithium battery make GPS fast positioning

Dynamic Conditions:
Altitude: 18, 000 meters (60, 000 feet) max
Velocity: 515 meters/second (1000 knots) max
Acceleration: 4g, max
Jerk: 20 meters/second, max

Specification:

General
1. Frequency L1, 1575. 42 MHz.
2. C/A code 1.023 MHz chip rate.
3. Channels: 20.

TIMEMARK-1PPS Pulse
1. Level CMOS 3V
2. Pulse duration 1 microsecond.
3. Time reference At the pulse positive edge.
4. Measurements Aligned to GPS second, 1 microsecond.

Datum
1. Default WGS-84.
2. Other Support different datum by request.

Physical Characteristics
1. Active Size: 25. 4(W) x 25. 4(D) x 7(H) (mm)
2. Weight: 2 g
3. Interface connector 6-pin straight male header, 1. 25 mmpitch.

Environmental Characteristics
1. Operating temperature range(C): -10   to 60 
2. Storage temperature range(C): -20  to 85 

Power:
1. Input power 3.3V — 5. 5VDC
2. Input current: Less than 80 mA (without antenna)
3. Backup power: 3V Rechargeable Lithium cell battery, up to 500hours
Discharge.

Acquisition Rate (Open sky, stationary requirements)
Reacquisition: 0.1 sec., average.
Hot start: 1 sec., average.
Warm start: 38 sec., average.
Cold start: 42 sec., average.

Interface:
Antenna connector type: MMCX, output 2. 8 VDC. (optional outputVCC_IN).
Minimum signal tracking: -159 dBm.
Two full duplex serial communication, CMOS interface, with userselectable baud rate (4800-Default, 9600, 19200, 38400).
NMEA 0183 Version 2. 2 ASCII output (GGA, GSA, GSV, RMC (VTG, GLLand ZDA for optional)).
DGPS protocol RTCM SC-104 message types 1, 2 and 9.
SiRF binary-position, velocity, altitude, status output.

GR-89 GPS Receiver Module